
27
Stainless Steel
Do not use a steel-wool pad; it will scratch the
surface.
Shake bottle well.
Place a small amount of CERAMA
BRYTE
®
Stainless Steel Appliance
Cleaner on a
damp
cloth or
damp
paper towel.
Clean a small area (approximately
8” x 8”/20.3 x 20.3 cm), rubbing with
the grain of the stainless steel if
applicable.
Dry and buff with a clean, dry paper
towel or soft cloth.
Repeat as necessary.
NOTE:
If a mineral oil-based stainless steel
appliance cleaner has been used before to
clean the appliance, wash the surface with
dishwashing liquid and water prior to using
the CERAMA BRYTE
®
Stainless Steel
Appliance Cleaner. After washing the
surface with dishwashing liquid
and water, use a generous amount
of CERAMA BRYTE
®
Stainless Steel
Appliance Cleaner to clean the appliance.
To Order
To order CERAMA BRYTE
®
Stainless Steel
Appliance Cleaner, please call our toll-free
number:
Parts Department
1-800-263-0686
www.GEAppliances.ca
CERAMA BRYTE
®
Stainless Steel Appliance
Cleaner
. . . . . . . . . . . . . . . . . . . . . . . . . .# 40616EF
www.GEAppliances.ca
Replacing the light bulb.
Cooktop Light/Nite Light
Replace with a 120 volt, 40 watt (max.) halogen
bulb. Order WB08X10051 from your GE supplier.
To replace the cooktop light/nite light,
first disconnect the power at the main
fuse or circuit breaker panel, or pull
the plug.
Remove the screw from the side of the
light compartment cover and lower the
cover until it stops.
Be sure the bulb is cool before
removing. Break the adhesive seal
by gently unscrewing the bulb.
Screw in the new bulb, then raise the
light cover and replace the screw.
Connect electrical power to the oven.
4
3
2
1
Remove screw.
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support