GE POWER LEADER GEH-6510 User Manual Download Page 37 | Manualshive

Page: 37 / 92

background image

34

••••

Chapter Four - Menus and Toolbars

DDE Server User’s Guide

Server Menu

The

Server

pull-down menu is shown below. Descriptions of the

Server

options

follow.

Run

NOTE:

The Server automatically goes into

Run

mode when the application is

started.

Run

mode and

Configure

mode are mutually exclusive; i.e., selecting Run

disables the

Configure

menu until

Stop

is selected. Similarly, when the Server is

Stopped, the

View

menu is disabled until

Run

is again selected.

Run

puts the PMCS DDE Server into action, ready to answer requests for data from

client applications. Clicking this menu item brings the server on-line with the
available configuration.

You must configure the server before it can be run or a client requests data from it.
Configuration is a one-time process (changes may be made later). The configuration
information is saved to disk and loaded each time the Server is run. You cannot
configure the Server while it is running. Choose

Run

to disable the

Configure

menu

item and enable the

View

menu. This action also enables the

Suspend Protocol

menu item.

The Server waits for DDE clients to become active. When a client requests data, the
PMCS DDE Server answers the request by retrieving this data from the appropriate
devices.

Stop

Stop

sets the PMCS DDE Server off-line, preventing it from requesting any data

from devices. Before you can stop the server, however, DDE links with client
applications must be broken (this may require closing the client application).

After the PMCS DDE Server is off-line, you can make configuration changes.

If, after entering

Stop

mode, you do not enter

Configure

mode, a DDE request from

a client automatically returns the Server to

Run

mode.

«
...
35
36
37
38
39
...
»

Summary of Contents for POWER LEADER GEH-6510





























































































Reviews:

No comments

Related manuals for POWER LEADER GEH-6510

NETWORK SATELLITE SERVER 4.0.5

Brand: Red Hat Pages: 82

CONTRIBUTE 3 - USING AND ADMINISTERING...

Brand: MACROMEDIA Pages: 256

Brand: Mitsubishi Pages: 38

Brand: Arturia Pages: 125

12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM

Brand: Autodesk Pages: 2577

Active Protection System

Brand: Lenovo Pages: 10

Brand: Lenovo Pages: 464

Brand: Lenovo Pages: 3

APPLICATION STACK 1.1 RELEASE

Brand: Red Hat Pages: 30

CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Brand: Red Hat Pages: 110

ALTIRIS DEPLOYMENT SOLUTION

Brand: Symantec Pages: 3

Brand: 360 Systems Pages: 58

Brand: AMX Pages: 3

ENTERPRISE LINUX 5 - DM MULTIPATH

Brand: Red Hat Pages: 42

Brand: IBM Pages: 15

Brand: MACROMEDIA Pages: 358

VIAVOICE 10-PRO USB EDITION

Brand: IBM Pages: 160

Brand: TANDBERG Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands