– 44 –
4. Rotate the fan assembly clockwise then
carefully maneuver the fan assembly out of the
machine compartment.
5. Using
a
fl
at blade screwdriver, remove the
spring clip.
6. Pull the fan blade off the motor shaft.
Spring Clip
8. Remove the 2 Phillips-head screws from the fan
housing.
9. Using
a
fl
at blade screwdriver or
fi
ngertips, lift
and spread each of the 2 tabs on the motor
clamp and pull the fan motor out of the housing.
7. Note the routing of the wiring through the
retainers and the position of the motor and
clamp. Remove the wiring from the retainers.
Retainer
Retainer
Retainers