– 40 –
Freezer Fan
The freezer fan is attached to the inside of the
freezer evaporator cover.
To remove the freezer fan assembly:
Remove the freezer evaporator cover (See
1.
Freezer Evaporator Cover.
) and place the cover
assembly on a protected surface so that the
inside faces upward.
Note the positioning of the wiring and untape
2.
the wire harnesses.
3. Remove the plastic wire tie and the freezer fan
wires from the retainer.
4. Remove the 4 Phillips-head screws that attach
the fan housing to the evaporator cover.
Wire
Tie
Retainer
Freezer
Fan
Replacing Evaporators Using the LOKRING
Method
Fresh Food Evaporator
Parts Needed:
Fresh Food Evaporator
•
Drier Assembly
•
Access Tube (part # WJ56X61)
•
LOKRING
•
Connectors- (part # WR97X10031)
(part # WR97X10085)
(part # WR97X10021)
Freezer Evaporator
Parts Needed:
Freezer Evaporator
•
Drier Assembly
•
Access Tube (part # WJ56X61)
•
LOKRING
•
Connectors- (2 of part # WR97X10021)
The LOKRING method provides a durable, vibration
resistant compression connection for both copper
and aluminum tubing. The connectors can be used
within a temperature range of -58°F (-50°C) to
+302°F (150°C) and showed to have a higher burst
strength than that of the tube itself. Refer to Service
Guide #31-9067 for complete instructions on using
the LOKRING method of installing an evaporator.
(
Continued next page
)
