GE PD900, Installation Instructions Manual

Page: 9 / 16

9
Installation Instructions
Select the proper position for the countertop
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1.)
Standard Installation Instructions
D
Installing the Anti-Tip Bracket
The anti-tip bracket is attached to
the back of the Drop-In Range. It is
designed to fit under the bottom of the
countertop opening at the rear. Measure
counter thickness at back of cutout to
determine correct bracket location.
D1
(Continued on following page)
1 For 3/4” Counter
2 For 1.18” (3 cm) Counter
3 For 1.5” Counter 4 For 3.5”
5 Alternate
(shown below)
ANTI-TIP INSTALLATION
ALTERNATE
ANTI-TIP INSTALLATION
Interior Wall
1/4 ” Min. Flat Area
Wall Stud
Countertop
Thickness
Bottom of
Countertop
Wire Cover
Glass
Maintop
Anti-Tip
Bracket
Bottom of
Countertop
to Engage
Bracket by
1/2 ” Min.
Wall Stud
10-3/8 ”
1-1/2 ”
Countertop
Surface
Interior Wall
Wire
Cover
Attachment
Anchored To
Wall Stud Is
Required
Anti-Tip Bracket
Attachment
Non-Kit Application
Glass Maintop
Position #5
Non-Kit Ap-
plication
*Attachment
To Engage
Bracket By 1/2 ” Min.
Anti-Tip Bracket Location
(Rear of Range)
Glass Cooktop