5-28
RSTi Network Adapter Manual User Manual -January 2012
GFK-2746
5
Setting Hardware
In order to complete Online function of IOGuidePro, please complete Hardware Setting for
communication.
Modbus TCP/IP support Network Adapter.
1. Connect IO module to Network Adapter.
Tips: Wire diagram for each IO module of
RSTi Technical Data
.
2. Connect Cable (RJ-45) to Ethernet Port of PC.
3. Charge up power in Network Adapter.
Modbus Serial support Network Adapter.
1. Connect Serial Cable to Serial Port in PC.
2. Set Node Address. Be sure not to be duplicated in case of RS-485.
3. If necessary, set Serial Communication option through DIP Switch. RS-485
requires all the same.
(Factory Default as Baud Rate: 9600, Data Bit: 8, Parity: None, Stop Bit: 1)
Note:
IOGuidePro supports RTU communication only, do not change Communication
DIP Switch.
4. In order to apply for the changed setting value, please newly charge up power in
NA.
Summary of Contents for PACSystems RSTi
