NX591E
12
Loc 2 –7 When Phone Fault Is Detected
Location 2
Events To Report To Central Station
(Phone fault detected) 16 segments of Feature Selection Data
Reporting must be enabled in the control panel for this location to function
properly.
This location selects the partition(s) to include when reporting to the Central Station. To exclude any
partition from reporting, simply turn off the LED corresponding to that particular partition. Using
Table
XI-1
enter the corresponding number of the partition(s) to include for each type of report found in
Segments 1 –16. Factory default is all partitions ON for Segment 1; All partitions are defaulted OFF
for Segments 2 -16.
Table XI-1
1 = Partition 1
3 = Partition 3
5 = Partition 5
7 = Partition 7
2 = Partition 2
4 = Partition 4
6 = Partition 6
8 = Partition 8
SEGMENT DESCRIPTION SEGMENT DESCRIPTION
1
Alarms
9
Tampers
2
Open/Close
10
Short Circuit & Ground Fault
3
Bypass
11
Sensor Lost
4
Zone Trouble
12
Sensor Low Battery
5
Power Trouble (AC Failure or
Low Battery)
13
Expander Trouble
6
Siren & Telephone Fault
14
Failure To Communicate
7
Test Reports
15
Zone Activity Monitor
8
Program, Download & Log Full
16
Reserved
Location 3
Special Events To Report To Central Station
(Phone fault detected) 8 segments of Feature Selection Data
This location selects the partition(s) to include when reporting Special Events to the Central Station.
To exclude any partition from reporting, simply turn off the LED corresponding to that particular
partition. Using
Table XI-1
on page 12, enter the corresponding number of the partition(s) to include
for each type of report found in Segments 1 – 8. Factory default is all partitions ON for Segments 2
and 4; all partitions OFF for Segments 1 and 3.
SEGMENT DESCRIPTION
1
Alarm Restores
2
Telephone Fault
3
Start Download
4
Fail to Communicate, Data Lost
5-8
Reserved
