NX-10 Expander Installation Guide
83
Configuring an output
You can specify events, users and partitions that can activate a particular output. The output can be
controlled using a schedule or by an X-10 device. If an output is controlled by a schedule, it can be
activated during the times specified in the schedule only. If it is controlled by an X-10 device, it can
be activated during the time the X-10 device is switched on or off. The following example configures
output 1 on output expander 24 to be activated by a box tamper event. This output is controlled by
schedule 1.
1.
Navigate with the
½¾
keys to
NX-507/508E>Output Exp 24>Outputs
and press
OK
.
2.
Scroll to
Output 1>Event>Tamper/Trouble>Box Tamper
and press
OK
.
3.
The keypad beeps once to accept the change and returns to
Tamper/Trouble
.
4.
Scroll to
Schedules
and press
OK
.
5.
Press the relevant keys to select schedule only and press
OK
.
6.
The keypad beeps once to accept the change and returns to
Schedules
.
Configuring users
You can specify the user code that triggers the selected output. The following example sets user code
1 to activate outputs on output expander 24.
1.
Navigate with the
½¾
keys to
NX-507/508E>Output Exp 24>Outputs>Output 1
and
press
OK
.
2.
Scroll to
Event>Miscellaneous>Code Entry
and press
OK
.
3.
The keypad beeps once to accept the change and returns to
Miscellaneous
.
4.
Scroll to
Zone/User>(User) 1
and press
OK
.
5.
The keypad beeps once to accept the change and returns to
Zone/User
.
6.
Navigate with the
½¾
keys to
Users>User 1>Outputs
and press
OK
.
7.
Press the relevant keys to select the outputs that the user code can activate and press
OK
.
8.
The keypad beeps once to accept the change and returns to
Outputs
.
Summary of Contents for NX-10
Page 1: ...NX 10 Alarm System Expander Installation Guide 1070336 ...
Page 160: ......
