3.
The keypad beeps once to confirm the change and returns to
Line Hold Digit
.
4.
Scroll to
Timers>Line Hold Timeout
and press
OK
.
5.
Select
60
and press
OK
.
6.
The keypad beeps once to confirm the change and returns to
Line Hold Timeout
.
Setting volume levels
You can adjust volume levels used with the NX-534E listen-in module. The following example sets
the volume for high gain listen in to level 4.
1.
Navigate with the
½¾
keys to
NX-534E>Volumes
and press
OK
.
2.
Scroll to
High Gain Listen In>4
and press
OK
.
3.
The keypad beeps once to accept the change and returns to
High Gain Listen In
.
Assigning X-10 devices
The NX-534E listen-in module can activate X-10 devices over the telephone. The following example
assigns device 1 (module number 5, house code L) to the NX-534E listen-in module.
1.
Navigate with the
½¾
keys to
NX-534E>Light Control>Device 1
and press
OK
.
2.
Scroll to
Unit Code
and press
OK
.
3.
Select
5
and press
OK
.
4.
The keypad beeps once to confirm the change and returns to
Unit Code
.
5.
Scroll to
House Code
and press
OK
.
6.
Select
L
and press
OK
.
7.
The keypad beeps once to confirm the change and returns to
House Code
.
Glossary
Location
Term
Definition
10
NX-534E Listen-in Module
A two-way audio voice communicator. If the control panel
communicates an alarm, the audio module allows the
central station to establish a two-way session or monitor the
premises for listen-in purposes.
10.1 Feature
Select
A menu entry that groups all optional features relating to
partition settings, control panel system settings and so on.
10.1.1 Mode
A menu option that specifies if the listen-in module is used in
line hold mode or call back mode.
10.1.2 Listen-in
Only
A menu option that enables the listen-in only mode. This is
the mode in which the central station can monitor sounds at
the customer's premises but cannot establish two-way
communication.
Summary of Contents for NX-10
Page 1: ...NX 10 Alarm System Expander Installation Guide 1070336 ...
Page 160: ......
