GE NetworX NX-1192E, User Manual

Page: 24 / 35

22
XXII. DISPLAYS IN THE PARTITIONING MASTER MODE
A.
ARMED and READY STATUS
The LCD screen will display the Armed and Ready status of ALL eight (8) partitions if
any or all of the areas is armed or not ready.
This display is reflecting all 8 areas are Ready,
and Area 5 is disarmed. NOTE: If a number is
flashing on the Armed line, that area is armed
Instant. If a number is flashing on the Ready
line, that area is ready to be Force Armed.
If ALL areas are disarmed and ready to arm, this display will appear on the LCD screen.
B.
ARMING AND DISARMING MULTIPLE PARTITIONS
To arm/disarm multiple partitions, enter a code that has arm/disarm authority for ALL of
the partitions to be armed/disarmed. The following display will appear on the LCD
screen.
The numbers on the top line represent the
disarmed areas to which this code has
access. The numbers on the bottom line
represent the areas that are armed. Refer to
the following table for possible conditions.
LCD DISPLAY FOR AREA
TOP LINE OVER BOTTOM LINE
CONDITION
Blank
Blank
Area Not used or Authorized
Dash (-)
Dash (-)
Area Not Ready
Flashing Area #
Dash (-)
Area Ready to Force Arm
Dash (-)
Flashing Area #
Area Armed Instant
Area #
Dash (-)
Area Disarmed & Ready to Arm
Dash (-)
Area #
Area is Armed
'LVDUP 
$UP 
'LVDUP 
$UP 