23
To
disarm
all of these areas, press
x
To
arm
all of these areas, press
y
To toggle a single area between the armed and disarmed conditions, press
À
[Area number]. For example: If Area 4 is armed,
À
[
will disarm Area 4. If Area
4 is disarmed,
À
[
will arm it.
Press
STAY during the exit delay to bypass all interior zones in the exit delay.
To control the individual areas, refer to the following section.
C.
INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE
Enter a code that is a valid arm/disarm code for the area you wish to operate. The
following display will appear on the LCD screen.
Only the areas authorized by this code will
appear.
To toggle between the armed and disarmed states of an individual area, press
À
area
number.
To operate an individual area, enter the number of the partition you wish to operate.
The LCD keypad will now operate as a single area keypad. All keys and functions
entered will affect this individual partition only. The lights and display represent the
status of that partition only. The word "System" will be replaced with the word "Area #".
The following is an example of this feature. To exit this screen, press
.
Area 5 is selected and Area 5 is ready to
arm. To exit the individual partition mode,
enter
D.
SILENCING ALARMS IN THE MULTI-PARTITION MODE
If the keypad is sounding an alarm or the siren is running, it can be silenced by
entering a code with the authority for the area(s) that are in alarm. NOTE: The EXIT,
BYPASS, and STAY keys will only work if an individual partition is selected.
³'LVDUP
$UP
$UHD5HDG\
7\SHFRGHWRDUP
Summary of Contents for NetworX NX-1192E
Page 1: ...NX 1192E LCD Keypad User s Manual ...
Page 33: ...31 ...
Page 34: ...32 SYSTEM NOTES ...
Page 35: ...NX1192E USERS MANUAL NX1192EUB02 REV B 10 10 02 ...
