QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
POSSIBLE CAUSE
A fuse
may be
or
breaker
Replace
ON
breaker.
●
circuit breaker the
position.
circuit
position.
CONTROL
closed.
●
pad
after entering cooking selection.
START
●
entered
and
it.
●
Make sure
have entered cooking time temperature
●
pad was
accidentally.
program
START pad.
●
Temperature
inserted properly
not
used
or
●
Make
you have entered
finished
temperature
setting
cooking programs.
*Make
entered
a
number after touching
AUTO
DEFROST or
ROAST
APPEARS
is missing or
plugged in securely
cooking
ON
that measure
temperature.
●
probe inserted for a program that does
the
APPEARS
●
Auto Cook,
Popcorn program, the door was
ON DISPLAY
be detected, or steam was
time.
was detected by
four minutes and seconds
start of
Popcorn program.
All these things are normal with your microwave oven:
●
Dimming oven light and change in blower sound may
●
Steam or vapor escaping from around the door.
occur while operating at power levels other than high.
●
Light reflection around door or outer case.
●
Dull, thumping sound while oven is operating.
●
During cooking you will hear “cracking” and
●
Some TV-Radio interference might be noticed
“popping” noises which are nothing more than
while using your microwave oven. It’s similar to
normal expansion of the oven.
the interference caused by other small appliances
●
At the end of microwave cycles you will hear a
and does not indicate a problem with your oven.
slight thump. This is normal.
If
need more
toll free: GE Answer Center
@
/ 800.626.2000/ consumer information service
31
