Installation Instructions
LEFTOVER PARTS
The following parts will be left over after the installation
of the kit:
REMOUNT LOWER DRAWER DOOR
Position the door so that the flange is positioned
above the bottom of the drawer and the top two
loosened screws are lined up with the slotted
screw holes.
Install the door onto the two screws.
8
A
B
Bottom Trim Covers (2)
Trim Panels (2)
(if applicable)
Screws (6)
REMOUNT LOWER DRAWER DOOR (cont.)
Rotate the top of the door forward until the
flange drops below the bottom of the drawer.
Use a Phillips-head screwdriver to screw the bottom
four screws into the door and tighten the top two
screws.
8
D
4
C
Flange
Flange
