Installation Instructions
MOUNT FOAM PAD TO LOWER DOOR
Slowly peel off the adhesive backing from the
foam pad.
Center the foam pad on the front face of the
drawer with the adhesive side facing the drawer.
Position the top surface of the pad against the
top trim cover.
NOTE: Refer to illustration for correct placement.
6
A
B
REMOVE BOTTOM TRIM COVER
ON LOWER DOOR
Flip the door upside down.
Use a Phillips-head screwdriver to unscrew the
three screws on the bottom trim cover.
Remove trim panel by sliding upward (if
applicable).
5
A
B
C
C
INSTALL DOOR PANEL ON LOWER DOOR
Peel clear protective lining from door panel.
Lay the back of the door on the floor.
Hook the lip of the door panel over the edge of
the top trim cover.
Rotate the bottom of the door panel under the
bottom trim cover until the door panel is fully
seated.
Flip the door upside down.
Using three of the provided screws, attach the
bottom of the door panel to the bottom of the door.
NOTE: Press on door panel to align screw holes.
CAUTION:
Door panel may have
sharp edges.
7
A
B
C
D
F
E
3
