INSTALL DOOR PANEL ON TOP
DRAWER (cont.)
Using three of the provided screws, attach the
bottom of the door panel to the bottom of the door.
NOTE: Press on door panel to align screw holes.
CAUTION:
Door panel may have
sharp edges.
3
Installation Instructions
MOUNT FOAM PAD TO UPPER DRAWER
Slowly peel off the adhesive backing from the
foam pad.
Center the foam pad on the front face of the
drawer with the adhesive side facing the drawer.
Position the top surface of the pad against the
top trim cover.
NOTE: Refer to illustration for correct placement.
2
A
B
C
2
D
REMOVE LOWER DRAWER DOOR
Open the lower drawer and use a Phillips-head
screwdriver to remove the bottom two screws
from each side.
Use a Phillips-head screwdriver to loosen the
top two screws ¼
″
from the door.
Remove the door by pulling upward and outward.
4
A
B
C
INSTALL DOOR PANEL ON TOP DRAWER
Peel clear protective lining from door panel.
Hook the lip of the door panel over the edge of
the top trim cover.
Rotate the bottom of the door panel under the
bottom trim cover until the door panel is fully
seated.
3
A
B
C
