– 18 –
5. Apply the other gasket strip to underside of
glass at front of cooktop.
6. Remove remaining adhesive backing.
7. Position cooktop over opening, making sure
that power cord is dropped into cabinet.
8. Lower cooktop into cutout, pressing gently and
evenly to seat.
Note:
If cooktop is installed in a 36-in. base
cabinet, mounting brackets cannot be used
because of interference with cabinet sides. In this
case, cooktop can be secured to cabinet with
angle brackets (not supplied).
Gasket
Countertop
GEA00246
9. Remove one screw at bottom of cooktop body
on both sides and secure bracket with those
screws. Then secure brackets to cabinet sides.
10. Insert hold-down bracket into highest slots on
right and left sides of cooktop. Cooktop has
three slots; the highest available will depend
on thickness of countertop.
11. Secure brackets to underside of countertop
with screws provided.
Electrical Connections of Downdraft
GEA00247
1. Connect three-pin plastic plug from blower/
motor assembly to three-pin plastic socket on
underside of vent, next to conduit.
2. Slide metal cover over connection and secure
with screws.
Electrical
6-pin socket
Pressure
regulator
Metal
cover
6-pin plug
Electrical
supply cord
Service
plate
GEA00248
3. Connect six-pin plastic plug from downdraft
assembly to six-pin plastic socket on
underside of cooktop, next to power cord.
4. Slide metal cover over connection and secure
with screws.
Connect Power
Plug power cord into properly grounded
receptacle.
