GEH-7252
3
May 2003
g
GE Capacitor & Power Quality Products
2. INTRODUCTION
This manual was specifically developed to
assist in the installation, interconnection and
operation of the GE Matrix Filter.
This manual is intended for use by personnel
experienced in the operation and maintenance
of electronic drives. Because of the high
voltages required by the filter and drive and
the potential dangers presented by rotating
machinery, it is essential that all personnel
involved in the operation and maintenance of
this filter know and practice the necessary
safety precautions for this type of equipment.
Personnel should read and understand the
instructions contained in this manual before
installing, operating or servicing the filter and
the drive to which the filter is connected.
Upon Receipt of this Filter:
The GE Matrix Filter has been subjected to
demanding factory tests before shipment.
Carefully inspect the shipping container for
damage that may have occurred in transit.
Then unpack the filter and carefully inspect for
any signs of damage. Save the shipping
container for future transport of the filter.
In the event of damage, please contact and
file a claim with the freight carrier involved
immediately.
If the equipment is not going to be put into
service upon receipt, cover and store the filter
in a clean, dry location. After storage, ensure
that the equipment is dry and that no
condensation has accumulated on the internal
components of the filter before applying
power.
Repair/Exchange Procedure
GE requires a Returned Material Authorization
Number before it can accept any filters that
qualify for return or repair. If problems or
questions arise during installation, setup, or
operation of the filter, please call us for
assistance at:
Phone: 518-746-5793
FAX: 518-746-5524
