Step 7 - Removing Second Protective Film
MS-206-15-08-1.0
2
Copyright © 2015 ikeGPS
Once the screen protector has been applied, remove
the second protective film using the yellow tab #2.
Step 6 - Applying Screen Protector
Place the tacky side against the MapSight LCD Screen and
carefully align the screen protector to match the bottom or
top edge of the display. Take care in this step to ensure the
screen protector is well aligned so that it will fit the whole
screen.
As you slowly pull off the protective film using Tab #1, lightly
press the tacky side down so it will adhere to the LCD screen.