GE LOGIQ E9 User Manual Download Page 207

Page: 207 / 256

Safety Precautions

LOGIQ E9

–

User Guide

4-5

Direction 5454884-100 English

Rev. 1

Hazard Symbols

Icon Description

Potential hazards are indicated by the following icons:

Table 4-1:

Potential Hazards

Icon

Potential Hazard

Usage

Source

Biological Hazard

Describes precautions necessary to
prevent the risk of disease transmission
or infections.
• Patient/user infection due to

contaminated equipment.

• Cleaning and care

instructions

• Sheath and glove

guidelines

ISO 7000
No. 0659

Electrical Hazard

Describes precautions necessary to
prevent the risk of injury through electric
hazards.
• Electrical micro-shock to patient, e.g.,

ventricular

• Probes
• ECG, if applicable
• Connections to back

panel

Moving Hazard

Describes precautions necessary to
prevent the risk of injury through moving
or tipping hazard!
• Console, accessories or optional

storage devices that can fall on patient,
user, or others.

• Collision with persons or objects may

result in injury while maneuvering or
during system transport.

• Injury to user from moving the console.

• Moving
• Using brakes
• Transporting

Acoustic Output Hazard

• Patient injury or tissue damage from

ultrasound radiation.

• ALARA, the use of

Power Output following
the ‘as low as
reasonably achievable’
principle

Explosion Hazard

Describes precautions necessary to
prevent the risk of injury through
explosion hazard!
• Risk of explosion if used in the

presence of flammable anesthetics.

• Flammable anesthetic

Fire and Smoke Hazard

• Patient/user injury or adverse reaction

from fire or smoke.

• Patient/user injury from explosion and

fire.

• Replacing fuses
• Outlet guidelines

Summary of Contents for LOGIQ E9
































































































































































































































































Search results

Summary of Contents for LOGIQ E9

Reviews:

Related manuals for LOGIQ E9

Brands by name

Popular brands

GE LOGIQ E9, User Manual

Search results

Summary of Contents for LOGIQ E9

Reviews:

Related manuals for LOGIQ E9

Brands by name

Popular brands