GE K0470, User Manual

Page: 33 / 78

3 Operation
K0470 Revision A 3 - 8 [EN] English
3.4 Operation and Example Procedures
Introduction
Before operation, the instrument must be connected to the correct electrical and pneumatic/
hydraulic) supplies, (Ref: Installation,Section 2).
When the instrument is switched ON the display shows measured pressure mode and the task set
before the power-off.
Measure Mode
The instrument works as a precision pressure indicator and shows the pressure measured at the
output port.
Pressing
Task enables pre-determined functions:
Task
The display shows the task screen (Ref: Illustration above).
When selected, e.g. Basic, the screen changes to show the selected task.
To measure pressure in the task proceed as follows:
1. Select the required units of pressure measurement from the measure set-up menu.
Selecting a task exits the menu and
changes the display to the task
selected.
Ê
Exit set-up.
’
Option refer to data sheet
Ê
Basic
Airfield
Task
’
Return to home.