GE K0470, User Manual

Page: 26 / 78

PACE Pressure Indicators User Manual
[EN] English 3 - 1 K0470 Revision A
3 Operation
This section contains quick reference charts detailing all the available functions and the set-up
menu.
3.1 Preparation
Make sure the electrical cables and pneumatic pipes comply with the installation requirements
(Ref: Section 2).
Before use do the following:
1. If necessary, do the maintenance task (Ref: Section 4).
2. For bench-top, single instrument operation do the following:
a.
Connect the instrument to the electrical supply.
b. Inspect the pneumatic hoses for damage, ingress of dirt and moisture.
3. Before use, the instrument should be tested.
4. Review and become familiar with the procedure before starting a process on a
component or system.
3.2 Power-up sequence
The following sequences of operation shows the instrument display.
Note: The following sequence is an example, the values and selections displayed depend on the
range(s) and options enabled in the instrument.
1. Set the power supply to ON.
2. The display shows the power-up sequence.
3. The instrument carries out a self-test.
a.
If the test finds a fault, the display
shows an error (Ref: Fault Finding and
Testing, Section 5).
4. If the self-test is successful the system
enables the touch screen and changes to
measure mode.
5. The touch screen shows the measured
pressure in the parameters selected in set-up.
6. The instrument is now ready for use.
Do not touch the display screen during power-up