GE JungleMUX 86445-31 Technical Practice And Installation Manual Download

Page: 61 / 95

342-86400-445PS

Issue

4.0

October

2006

Page

Copyright



GE Multilin Inc. 2002

Inserting the Unit in the Shelf

WARNING

For systems already in service, inserting a 2W FXS unit without the ACK

button pressed may cause traffic disruption in a DS0 channel on the

same JVT.

WARNING

Do not use the red tab to force the unit into the shelf as this could result

in damage to the red tab.

1. Insert the unit to the point of resistance.
2. With the “ACK” button pressed, gently seat the unit into the shelf by pressing

the front panel. (Ensure the red tab is not preventing the unit from insertion.)

Note

: The 2W FXS unit inserted with ACK button pressed is in the “Sleep

mode” and the DS0 channel assignment on the unit is disabled at that point.

3. Use VistaNET (local connection) to program the unit in accordance to the

NAD for the given node. Refer to the Configuration Section of this manual.

Removing the Unit from the Shelf

1. Use the red tab to remove the unit from the shelf.

Note:

The Copy-and-Paste available in VistaNET (local connection only) can be

used to copy the configuration from the unit to be removed to the replacement
unit. For more information refer to the Configuration section.

Summary of Contents for JungleMUX 86445-31
































































































Search results

Summary of Contents for JungleMUX 86445-31

Reviews:

Related manuals for JungleMUX 86445-31

Brands by name

Popular brands

GE JungleMUX 86445-31, Technical Practice And Installation Manual

Search results

Summary of Contents for JungleMUX 86445-31

Reviews:

Related manuals for JungleMUX 86445-31

Brands by name

Popular brands