manualshive.com logo in svg

GE JungleMUX 86445-31, Technical Practice And Installation Manual, Page: 53 / 95

Share
Download
GE JungleMUX 86445-31 Technical Practice And Installation Manual Download Page 53

  

342-86400-445PS 

  

Issue 

4.0 

  

October 

2006 

  

Page 

53 

 

 

 

Copyright 

  GE Multilin Inc. 2002 

 

Push-button (ACK) 

 
The first use of the push-button is a LED and microprocessor test.   If the 2W 
FXS unit is operating normally, holding the front panel pushbutton down causes 
all the LEDs to light.  The main use for this test is to determine that the front 
panel LEDs are functional and that the microprocessor firmware code is running 
normally (microprocessor is not locked up). 
 

Note

: The microprocessor test does not cause any disruption in traffic. 

 
The second use of the push-button is to put the unit into a "sleep state".  This 
state is enabled when the 2W FXS unit is inserted in the shelf with the ACK 
button pressed.  In this condition, the micro ignores all settings until a local 
VistaNET connection is established to the unit’s CI port.  On establishing this 
connection, the software will automatically clear the unit’s Channel settings (will 
set them to “–“) and restart the unit at which point the user can configure the unit 
to the desired settings.  If the unit is inserted with the ACK button pressed and 
then removed and inserted normally (no local VistaNET connected), all previous 
settings will remain. 
 

Note

: Inserting the unit into the equipment shelf without the ACK button pressed 

may cause a traffic disruption in an in-service system.

 

 
 

Craft Interface (C.I.) Jack 

 
The Craft Interface allows a user to connect a PC computer serial (COM) port to 
the unit.  The CI is an RJ-11 connector, which transmits and receives a 9600 b/s 
RS-232 signal.  A Microsoft-Windows-based VistaNET software allows the user 
to configure the unit and monitor its status through the CI port. 
 

Summary of Contents for JungleMUX 86445-31
































































































Reviews:

No comments