manualshive.com logo in svg

GE JungleMUX 86445-31, Technical Practice And Installation Manual, Page: 33 / 95

Share
Download
GE JungleMUX 86445-31 Technical Practice And Installation Manual Download Page 33

  

342-86400-445PS 

  

Issue 

4.0 

  

October 

2006 

  

Page 

33 

 

 

 

Copyright 

  GE Multilin Inc. 2002 

 
Cadence Type 

Sets the type of ringing produced when in PLAR mode.  May be set 
to 

North American

, 

European

 or 

Steady

. 

Note:

 This field is active only if PLAR is selected in the Signalling 

Type field (see Signalling Setup window) and the unit's Micro code 
is version 2.5 or later. 

 
Ringing Duration 

Sets the ringing duration when in PLAR mode.  May be set to 

10 

sec

, 

20 sec

, 

60 sec

 and 

Indefinite

. 

Note:

 This field is active only if PLAR is selected in the Signalling 

Type field (see Signalling Setup window) and the unit's Micro code 
is version 2.5 or later. 

Note:

 In the Loop Start (LS) and Ground Start (GS) signaling 

modes the ringing duration is not limited. 

 

Signalling Monitor 

 
 XMT 

Signalling 

Shows current signaling status sent towards the far-end unit. 

Note:

  When an Invalid signaling condition (i.e. combination of the 

two signaling bits) is selected in the Transmit Signalling field (see 
Test Setup frame), the unit will send the selected combination even 
though it does not apply to any valid signaling condition for the 
Signalling Type chosen. 

 
 Receive 

Signalling 

Shows current signaling status received from the far-end unit 
(unless overridden by the locally forced RCV Signalling test 
condition in which case the forced condition is displayed). 
 

Unit Monitor 

 
 Unit 

Status 

Displays the current status of the unit.  The possible readings are:  

Temperature

 (unit temperature exceeds 93ºC) and 

OK

. 

 

 Temperature 

Displays the current temperature of the unit in ºC.  An alarm is raised in 
the Unit Status field if this reading exceeds 93ºC. 
 

Summary of Contents for JungleMUX 86445-31
































































































Reviews:

No comments