background image

 

 

 

Proper care and cleaning are important so your

Follow these directions carefully in caring for your

 cooktop will give you efficient

cooktop to assure safe and proper maintenance.

and satisfactory service. If soil, mineral deposits
from evaporated water spills or metal rub-off from

Be sure that the surface unit control knobs are
turned off and that the entire cooktop is cool

aluminum cookware is not removed, it will burn

before cleaning. Do not use a cooktop cleaner on

on the glass cooktop surface and cause permanent
discoloration.

a hot cooktop. The fumes can be hazardous to your
health and can chemically attack 

 glass surface.

Control Knobs

The control knobs may be removed for easier
cleaning.

Before removing the knobs for cleaning, 

please

note that the knobs on the left side and the knobs
on the right side are on the proper OFF position.
When replacing the knobs, check the OFF position
to insure proper placement.

The knob stem has a groove in each side. The groove
on one side has a spring clip. The other groove is
clear (see illustration). When removing the knob,
it may be helpful to slip a thin cloth (such as a
handkerchief) or a piece of string under and around
the knob edge and pull up. Check the inside of the

knob and find the molded rib.

Wash the knobs in soap and water or a vinegar and
hot water solution but do not soak.

Replace the knob by fitting the molded rib inside
the knob into the clear groove on the stem.

Clear Groove

in Stem

Cooktop Frame

Use the same cleaning methods as those described for the glass ceramic top
with the exception of using a scraper. Do not scrape the frame as this will
damage the metal surface.

13

Summary of Contents for jp370b

















Reviews: