Normal Daily Use Cleaning
ONLY
use CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA BRYTE
®
Ceramic Cooktop Cleaner. This helps
protect the top and makes clean-up
easier.
Daily use of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
Remove the burner grates.
Shake the cleaning cream well. Apply a
few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner directly to the cooktop.
Use a paper towel or CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse. Be sure no excess
residue is left on the electrodes or
burner parts.
NOTE:
It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
Burned-On Residue
WARNING:
DAMAGE to your glass surface
may occur if you use scrub pads other than
those recommended.
Allow the cooktop to cool.
Remove the burner grates. Spread
a few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner to the entire burned
residue area.
Using the included CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
If any residue remains, repeat the steps
listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
®
Ceramic Cooktop Cleaner and a paper
towel.
The CERAMA BRYTE
®
Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under “To Order
Parts” section on next page.
NOTE:
Do not use a dull or
nicked blade.
Clean your cooktop after
each spill. Use CERAMA
BRYTE
®
Ceramic Cooktop
Cleaner.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Remove the burner grates.
Use a single-edge razor blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil.
It will be necessary to apply pressure
to the razor scraper in order to remove
the residue.
After scraping with the razor scraper,
spread a few drops of CERAMA BRYTE
®
Ceramic Cooktop Cleaner to the entire
burned residue area. Use the CERAMA
BRYTE
®
Cleaning Pad to remove any
remaining residue.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
®
Ceramic Cooktop Cleaner and a paper
towel.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite
®
Multi-Purpose No
Scratch blue scrub pad.
Cleaning the glass cooktop.
(on some models)
ge.com
33
Operating
Instructions
Car
e
and
Cleaning
Installation
Instructions
Tr
oubleshooting
Tips
Safety
Instructions
Consumer
S
uppor
t