background image

27

OPERATING THE SELF-CLEANING OVEN

Normal Cleaning Time: 4 hours

Before a Clean Cycle

We recommend venting with an open window or
using a ventilation fan or hood during the first self-
cleaning cycle.

1. Remove the broiler pan, broiler grid, all cookware

and any aluminum foil from the oven—they can’t
withstand the high cleaning temperatures.

NOTE: The oven shelves may be cleaned in 
the self-cleaning oven. 
However, they will darken,
lose their luster and become hard to slide. Wipe the
shelf supports with cooking oil after self-cleaning
to make shelves slide more easily.

2. Wipe up heavy soil on the oven bottom. If you 

use soap, rinse thoroughly before self-cleaning 
to prevent staining.

3. Clean spatters or soil on the oven front frame and

the oven door outside the gasket with a dampened
cloth. The oven front frame and the oven door
outside the gasket do not get cleaned by the self-
clean cycle. On these areas, use detergent and hot
water or a soap-filled steel wool pad. Rinse well
with a vinegar and water solution. This will help
prevent a brown residue from forming when the
oven is heated. Buff these areas with a dry cloth.
Do not clean the gasket. 

Clean the top, sides and outside front of the oven
door with soap and water. Do not use abrasives or
oven cleaners.

Make sure the oven light bulb cover is in place.

Do not rub or clean the door gasket—
the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact 
and well-fitting oven door gasket is essential for
energy-efficient oven operation and good baking
results. If you notice the gasket becoming worn,
frayed or damaged in any way or if it has become
displaced on the door, you should have it replaced.

Do not let water run down through openings in 
the top of the door. 
To help prevent water from
getting in these slots when cleaning, open the door
as far as it will go.

4. Close the oven door and make sure the oven light 

is off. If the oven light is not turned off, the life 
of the bulb will be shortened or it may burn out
immediately. The door latches automatically after
the clean cycle is set.

Do not use commercial oven cleaners or oven
protectors in or near the self-cleaning oven.
A combination of any of these products plus the 
high clean-cycle temperature may damage the
porcelain finish of the oven.

Important
The oven door must be closed and all controls must
be set correctly for the cycle to work properly.

(continued next page)

Br
oiling Guide

Operating the Self-Cleaning Oven

Oven

front

frame

Area

inside

gasket

Oven
light

Openings

in door

Oven door

gasket

Area

outside

gasket

Summary of Contents for JDP39









































Reviews: