background image

HELP US HELP YOU…

Before using your range, read this 
guide carefully.

It is intended to help you operate and maintain your
new range properly.

Keep it handy for answers to your questions.

If you don’t understand something or need more help, call:

If you don’t understand something or need more help,
write (include your phone number):

Consumer Relations Manager
Camco Inc.
1 Factory Lane
Suite 310
Moncton, N.B. E1C 9M3

How to Remove Packaging Tape

To assure no damage is done to the finish of the
product, the safest way to remove the adhesive left
from packaging tape on new appliances is an
application of a household liquid dishwashing
detergent, mineral oil or cooking oil. Apply with a
soft cloth and allow to soak. Wipe dry and then apply
an appliance polish to thoroughly clean and protect
the surface.

NOTE: The plastic tape must be removed from the
chrome trim on range parts. It cannot be removed if 
it is baked on.

Write down the model and serial
numbers.

You’ll find them on a label behind the storage drawer.

These numbers are also on the Consumer Product
Ownership Registration Card that came with your
range. Before sending in this card, please write these
numbers here:

Model Number

Serial Number

Use these numbers in any correspondence or service
calls concerning your range.

If you received a damaged range…

Immediately contact the dealer (or builder) that sold
you the range.

Save time and money. 
Before you request service…

Check the Problem Solver in the back of this guide. 
It lists causes of minor operating problems that you
can correct yourself.

IF YOU NEED SERVICE…

To obtain service, see the Consumer Services page in
the back of this guide.

We’re proud of our service and want you to be
pleased. If for some reason you are not happy with
the service you receive, here are two steps to follow
for further help.

FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In most
cases, this will solve the problem.

NEXT, if you are still not pleased, write all the
details—including your phone number—to:

Consumer Relations Manager
Camco Inc.
1 Factory Lane
Suite 310
Moncton, N.B. E1C 9M3

2

Summary of Contents for JDP39









































Reviews: