GE JCKP30-27, Owner'S Manual

Page: 18 / 64

18
Special features of your oven control.
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Press the
Bake
and
Broil Hi/Low
pads at the same time for 3 seconds,
until the display shows
SF.
Press the
Clock
pad once. The
display will show
12 hr.
If this is
the choice you want, press the
Start pad.
Press the
Clock
pad again to change
to the 24-hour military time clock.
The display will show
24 hr. If this
is the choice you want, press the
Start
pad.
Press the Clock pad again to black
out the clock display. The display
will show
OFF.
If this is the choice
you want, press the
Start
pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
+
Tone Volume
(on some models)
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the
Bake
and
Broil Hi/Low
pads
at the same time for 3 seconds, until
the display shows
SF .
Press the
Oven Light
pad. The display
will show
2 BEEP
. This is the middle
volume level.
Press the Oven Light pad again. The
display will show
3 BEEP
. This is the
loudest volume level.
Press the Oven Light pad again. The
display will show 1 BEEP . This is the
quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(
1 BEEP
,
2 BEEP
,
3 BEEP
).
Press the
Start
pad to activate the
desired level shown.
+
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking and roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed Cook
and Hold will automatically start.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Press the
Bake
and
Broil Hi/Low
pads at the same time for 3 seconds
until the display shows
SF.
Then
proceed with steps 2 through 3.
Press the
Cook Time
pad. The display
will show Hld OFF.
Press the
Cook Time
pad again to
activate the feature. The display will
show
Hld ON.
Press the Start pad to activate the
cook and hold feature and leave the
control set in this special features
mode.
+
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support