23
How to Delay the Start of Cleaning.
Touch the
SELF CLEAN
pad.
Using the
+
or
–
pad, enter the
desired clean time.
Touch the
START TIME
pad.
Using the
+
or
–
pad, enter the time
of day you want the clean cycle to
start.
Touch the
START
pad.
Using the self-cleaning oven.
(on some models)
The oven door must be closed and all controls must be set corre
ctly for the cycle to work properly.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the
LOCKED DOOR
light
goes off.
When the
LOCKED DOOR
light is off, open
the door.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
with a vinegar and water mixture.
These deposits are usually a salt
residue that cannot be removed by the
clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
You cannot set the oven for cooking
until the oven is cool enough for the
door to unlock.
If the shelves become hard to
slide, wipe the shelf supports with
cooking oil.
1
2
3
4
5
Consumer Support
Troubleshooting Tips
Care and Cleaning
Safety Instructions
Installation
Instructions
Operating
Instructions
Summary of Contents for JCAS745
Page 42: ...42 Notes...