GE JCAS745, Owner'S Manual And Installation Instructions, Page: 13 / 46

13
To Set the Clock
To Set the Timer
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a timed
baking or self-cleaning cycle.
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
1
1
2
2
3
3
4
Touch the
START/ON
pad until the
time of day shows in the display. This
enters the time and starts the clock.
Touch the
START/ON
pad. The time
will start counting down, although
the display does not change until
one minute has passed.
When the timer reaches
:00,
the
control will beep 3 times followed
by one beep every 6 seconds until
the TIMER pad is touched.
Using the clock, timer and convenience outlet.
(on some models)
Not all features are on all models.
To check the time of day when the display
is showing other information, simply touch
the TIMER pad. The time of day shows
until another pad is touched.
Touch
TIMER
pad and hold for 3
seconds
Touch the
+ or – pads.
Touch the TIMER pad.
Touch the + or – pads until the
amount of time you want shows
in the display. The maximum time
that can be entered in minutes is 59.
Times more than 59 minutes should
be changed to hours and minutes.
If the + or – pads are not touched within
one minute after you touch the TIMER pad,
the display reverts to the original setting.
If this happens, touch the TIMER pad and
reenter the time of day.
If you make a mistake, touch the
TIMER
pad and begin again.
Make sure the clock is set to the
correct time of day.
The timer is a minute timer only.
The OFF pad does not affect the
timer.
Consumer Support
Troubleshooting Tips
Care and Cleaning
Safety Instructions
Installation
Instructions
Operating
Instructions