14
To Reset the Timer
To Cancel the Timer
End of Cycle Tones
(on some models)
Clear the tones by pressing the pad of the
function you are using.
Power Outage
If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
Convenience Outlet
(on some models)
The 120V convenience outlet located on
the top of the backguard may be used to
plug in small electrical appliances.
When using the outlet, be sure that the
electrical cord does not rest on or near a
surface unit. If the surface unit is turned
on, the cord will be damaged.
If the display is still showing the time
remaining, you may change it by touching
the
TIMER
pad, then touch the
+
or
–
pads
until the time you want appears in the
display.
Touch the
TIMER
pad twice.
If the remaining time is not in the display
(clock, delay start or cooking timer are in
the display), recall the remaining timer by
touching the
TIMER
pad and then touching
the
+
or
–
pads to enter the new time you
want.
Using the clock, timer and convenience outlet.
(on some models)
Not all features are on all models.
To reset the clock, touch the
TIMER
pad
twice. Enter the correct time of day by
touching the
+
or
–
pads. Touch the
START/ON
pad.
To reset the circuit breaker, press the
switch located near the outlet on top of
the backguard.
Consumer Support
Troubleshooting Tips
Care and Cleaning
Safety Instructions
Installation Instructions
Operating Instructions
Summary of Contents for JCAS745
Page 42: ...42 Notes...