Simon Security System
18
3.
Press
Add
from the Start menu. Panel announces,
Select from main menu
4.
Press
Option #.
Panel announces,
Option 1, press again for next option or done to
select.
5.
Press
02
. Panel announces,
Option 2, press again for next option or done to select
6.
Press
DONE
. Panel announces,
Option 2 is on
.
Delete
disables the panel voice.
Note
The panel voice is always on
for status messages, open
sensor responses and when
in program mode.
1.
Open panel cover. Panel announces,
Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces,
Please select from
Start Menu.
3.
Press
Delete
from the Start menu. Panel announces,
Select from main menu
4.
Press
Option #
. Panel announces,
Option 1, press again for next option or done to
select.
5.
Press
02.
Panel announces,
Option 2 press again for next option or done to select.
6.
Press
DONE
. Panel announces,
Option 2 deleted.
Option 03 - Latchkey Time
Adding this option allows you to program Latchkey Time. Latchkey is used to notify
parents if children do not arrive home and disarm the system at a predetermined time.
Note
The system clock must be
set for Latchkey to function.
1.
Open panel cover. Panel announces,
Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces,
Please select from
Start Menu.
3.
Press
Add
from the Start menu. Panel announces,
Select from main menu
4.
Press
Option #.
Panel announces,
Option 1, press again for next option or done to
select.
5.
Press
03
. Panel announces,
Option 3, press again for next option or set latchkey
hours and minutes, then press done.
6.
Press
Hours
and
Minutes
to set the time.
7.
Press
DONE
. Panel will announce Latchkey time that has been set.
Delete
turns off this option and Latchkey cannot be enabled when the panel is armed.
1.
Open panel cover. Panel announces,
Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces,
Please select from
Start Menu.
3.
Press
Delete
from the Start menu. Panel announces,
Select from main menu
4.
Press
Option #.
Panel announces,
Option 1, press again for next option or done to
select.
5.
Press
03
. Panel announces,
Option 3, press again for next option or done to delete.
6.
Press
DONE
. Panel announces,
Option 3 deleted.
Option 36 and 37- Sensor Activated Light Lockout Start and
Stop Times
Adding these options lets you control when sensor activated lights are active. The panel
will not turn on a light between the programmed start time (option 36) and the pro-
grammed stop time (option 37), even if sensor activated lights are on.
Both options
must be programmed for this option to work correctly
.
For example, if you don’t want sensor activated lights to be active during daylight
hours, set the lockout start time to begin at dawn and set the stop time (option 37) to
coincide with sunset.
Option 36: Sensor Activated Light Lockout Start Time
Add
enables sensor activated light lockout start time (midnight to 11:59
P
.
M
.).
1.
Open panel cover. Panel announces,
Use numbered keys to enter ID.
2.
Enter Access Code using the numbered keys. Panel announces,
Please select from
Start Menu.
3.
Press
Add
from the Start menu. Panel announces,
Select from main menu
