GE IC754VSB06MTD, Hardware User'S Manual

Page: 60 / 76

3-32 6" QuickPanel* ViewBasic, Monochrome, Round Bezel – September 2010 GFK-2327B
3
To change the DRAM memory allocation
1. In the Control Panel, double-tap System. The System Properties
dialog box appears.
2. On the Memory tab, drag the slider to divide the DRAM into Storage
and Program memory.
The amount of memory allocated to and used by each area is shown on
the dialog box. The amount of memory allocated to and used by each
area is displayed numerically. The blue bar indicates the current
amount of unallocated DRAM and determines the boundaries within
which the slider can move.
3. Tap OK to apply the new setting.
4. To save the settings, run the Backup utility. (See page 2-7.)
Boot Loader ROM
The Boot Loader ROM provides 512 KB of non-volatile storage for the
QuickPanel View’s initialization program. This program configures the
QuickPanel View hardware then starts the operating system’s execution. This
memory is not accessible from Windows CE Explorer, nor should any attempts
be made to modify the contents of this ROM.