2
IMPORTANT SAFETY INFORMATION.
WARNING:
Read entire manual. Failure to follow all guides and rules could cause personal injury or property
damage.
■
Check with your local public works department for plumbing codes. You must follow their guidelines as you install the Water Filtration
system.
SAFETY PRECAUTIONS
■
Use the Water Filtration system on a potable, safe-to-drink, home
COLD
water supply only. The filter canisters will not purify the water,
or make it safe to drink.
■
Do not
use on a hot water supply (100
°
F max.). Install on cold water line only.
WARNING:
Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain
filterable cysts.
PROPER INSTALLATION
This Water Filtration system must be properly installed and located in accordance with the Installation Instructions before it is used.
CAUTION:
To reduce the risk of property damage due to water leakage, install or store where it will not be exposed to
temperatures below freezing or exposed to any type of weather. Water freezing in the system may damage it and may result in water
leakage, damaging property. Change filter out if it was exposed to freezing temperatures. Do not attempt to treat water over 100°F.
WARNING:
Discard all unused and packaging material after installation. Small parts remaining after installation could
be a choke hazard.
■
Your Water Filtration system will withstand up to 120 pounds per square inch (psi) water pressure. If your house water supply pressure is
higher than 80 psi, install a pressure reducing valve before installing the Water Filtration system.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
