GE GRD33G3A User Manual Download

Page: 39 / 68

CONNECTIONS

Things to Know Before
Connecting Components

Protect Your Components from Power Surges

•

Connect all components before plugging any power
cords into the wall outlet.

•

Always turn off the DSS

receiver, TV and other

components before you connect or disconnect any
cables.

Position Cables Correctly to Avoid Audio Hum or
Interference

•

Insert all cable plugs firmly into their jacks.

•

Place the audio/video cables to the sides of the TV’s
back panel instead of straight down the middle after
you connect your components.

•

Try not to coil any twin-lead cables and keep them
away from the audio/video cables as much as
possible.

•

Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed with
your unit.

Protect Your Components from Overheating

•

Do not block ventilation holes in any of the
components. Arrange the components so that air
can circulate freely.

•

Do not stack components.

•

Allow adequate ventilation when placing your
components in a stand.

•

Place an amplifier or DSS

receiver on the top shelf

of the stand so heated air rising from it will not flow
around other components.

CONNECTIONS

Summary of Contents for GRD33G3A





































































Search results

Summary of Contents for GRD33G3A

Reviews:

Related manuals for GRD33G3A

Brands by name

Popular brands

GE GRD33G3A, User Manual

Search results

Summary of Contents for GRD33G3A

Reviews:

Related manuals for GRD33G3A

Brands by name

Popular brands