GE GRD33G3A User Manual Download

Page: 58 / 68

REFERENCE

Glossary

The following is a list of terms used in this manual. There is also a glossary contained within the Assistance

menu of your DSS

system.

Access Card

Identifies you to the DSS

service providers and is required for your DSS

system to work. Do not remove the

access card except when a new card has been issued to replace the original.

Alternate Audio

Refers to the different audio channels that may be broadcast in conjunction with a video program. A foreign

language translation is an example.

Ant Button

Remote control buttons that toggles the input signal to your TV from the antenna or cable signals to the

satellite signal. Similar in function to that of TV/VCR buttons on some VCRs and remote controls.

Attractions

Previews of special programs broadcast by your program provider.

Azimuth

Refers to the left-to-right positioning of your DSS

dish. When you enter your zip code (or latitude and

longitude), the display screen provides the number corresponding to an azimuth setting for your location.

DSS

Receiver

Receives, processes, and converts the digitally compressed satellite signals into audio and video.

Elevation

Refers to the up and down positioning of your DSS

dish. When you enter your zip code (or latitude and

longitude), the display screen provides the number corresponding to the elevation setting for your location.

Limits

There are three kinds of limits. The Ratings Limit allows you to control program viewing of rated programs by

ratings level. The Spending Limit controls spending on a cost-per-program basis. The Parent Approved

channel list allows you to select which channels can be viewed when the system is locked.

Locks

The means of restricting access to certain features of the DSS

system. The lock is controlled by a 4-digit

password. The closed or open lock icon in the channel marker indicates whether your system is locked or

unlocked.

Mailbox

Stores incoming electronic messages sent to you by your program providers. The Mailbox is accessed

through the on-screen menu system, and can store up to ten messages of forty characters each.

Summary of Contents for GRD33G3A





































































Search results

Summary of Contents for GRD33G3A

Reviews:

Related manuals for GRD33G3A

Brands by name

Popular brands

GE GRD33G3A, User Manual

Search results

Summary of Contents for GRD33G3A

Reviews:

Related manuals for GRD33G3A

Brands by name

Popular brands