49-90570-2
9
USING THE W
A
SHER
Getting started
I
Delay Wash
Use to delay the start of your washer.
1. Choose your wash cycle and any options.
2. Press
Delay Wash
button. You can change the delay time in 1-hour increments (up to 24
hours) each time you press the
Delay Wash
button. Stop pressing the button when your
desired time is displayed.
3. Press the
Start/Pause
button to start the countdown.
The countdown time will be shown in the
Est Time Remaining
(Estimated Time Remaining)
display.
NOTES:
•
If the door is opened while the washer is in
Delay Wash
, the countdown time will stop the
count down and the display will say “door”. The door must be closed and the
Start/Pause
button must be pressed to continue the delay time count down.
•
You can delay the start of a washer cycle up to 24 hours.
The light on the button will light up when
Delay Wash
is on.
Delay
Wash
J
Start/Pause
Press to start a wash cycle. If the washer is running, pressing it once will pause the washer
and unlock the door. This function can be used to add garments during a cycle. Press again
to restart the wash cycle.
NOTE:
If the washer is paused and the cycle is not restarted within 15 minutes, the current
wash cycle will be cancelled.
NOTE:
In some cases the washer will drain first, then unlock the door when it is paused.
NOTE:
The washer performs automatic system checks after pressing the
Start/Pause
button. Water will flow in 45 seconds or less. You may hear the door lock and unlock before
water flows; this is normal.
K
Lock
You can lock the controls to prevent any selections from being made. Or you can lock or
unlock the controls after you have started a cycle.
Children cannot accidentally start the washer by touching pads with this option selected.
To lock the washer, press and hold the
Soil
and
Temp
buttons together for 3 seconds.
To unlock the washer controls, press and hold the
Soil
and
Temp
buttons together for 3
seconds. A sound is made to indicate the lock/unlock status.
The control lock icon on the display will light up when it is on.
NOTE:
The
Power
button can still be used when the machine is locked.
Temp
Soil
Start
Pause
L
Signal
When the light is on, the washer will beep at the end of the cycle and every time you press a
button on the control panel.
To turn the signal off, press and hold the
Temp
and
Spin
buttons together for 3 seconds.
A sound is made to indicate the lock/unlock status.
Temp
Spin
