GE GFDS350ELWW, Service Manual

Page: 65 / 111

Copyright 2011
65
Motor & Blower Wheel
10. Remove the Phillips-head
screw, then disengage the motor
moisture shield from the motor
bracket.
11. Raise the rear of the motor bracket to clear the tab protruding from the
bottom of the chassis. Slide the motor bracket back until the bracket tabs
clear the slots in the chassis. Remove the motor and blower wheel
assembly from the chassis.
Note:
When installing the motor and blower wheel assembly, ensure that
the 2 rear tabs on the motor bracket are inserted into the slots in the motor
support, and the 2 front tabs on the motor bracket are inserted into slots
provided in the chassis.