Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
49
DHCP Server
DHCP is the abbreviation of Dynamic Host Configuration Protocol that is a protocol
for assigning dynamic IP addresses to devices on a network. With dynamic
addressing, a device can have a different IP address every time it connects to the
network. In some systems, the device's IP address can even change while it is still
connected. DHCP also supports a mix of static and dynamic IP addresses. Dynamic
addressing simplifies network administration because the software keeps track of IP
addresses rather than requiring an administrator to manage the task. This means
that a new computer can be added to a network without the hassle of manually
assigning it a unique IP address.
The system provides the DHCP server function. Having enabled the DHCP server
function, the switch system will be configured as a DHCP server.
System configuration
The Dynamic Host Configuration Protocol (DHCP) Server gives out IP addresses when
a device is booting up and request an IP to logged on to the network. It must be set
as a DHCP client to obtain the IP address automatically.
Figure 5-5: DHCP Server Configuration interface
Summary of Contents for GE-DSH-73
