Chapter 5: Web-Based Management
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
123
This page includes the following fields:
Object
Description
IEEE 802.1x Protocol:
Enable or disable 802.1x protocol.
Radius Server IP:
Assign the RADIUS Server IP address.
Server Port:
Set the UDP destination port for authentication requests to the
specified RADIUS Server.
Accounting Port:
Set the UDP destination port for accounting requests to the
specified RADIUS Server.
Shared Key:
Set an encryption key for using during authentication sessions with
the specified RADIUS server. This key must match the encryption
key used on the RADIUS Server.
NAS, Identifier:
Set the identifier for the RADIUS client.
Port Configuration
You can configure the 802.1x authentication state for each port. The state provides
Disable, Accept, Reject, and Authorize.
Figure 5-66: 802.1x Per Port Setting interface
Summary of Contents for GE-DSH-73
