49-60765
17
Installation Instructions
1
REMOVE THE FREEZER DOORS (if needed)
NOTE:
8QSOXJUHIULJHUDWRUEHIRUHUHPRYLQJGRRUV
A.
Starting with the
left-hand door,
use a 1/4"
nut driver to remove the screw from the top
hinge cover, and then remove the cover.
B.
'LVFRQQHFWWKHZLULQJKDUQHVVHVXQGHUWKH
hinge cover by pressing the release catch on
the wire harness connector and pulling the
ends apart.
NOTE:
there are 2 wire harness connections
under the left-hand top hinge cover, and 1
wire harness connection under the right-hand
top hinge cover.
C.
8VLQJDPPVRFNHWZUHQFKUHPRYHWKUHH
screws from the top hinge.
NOTE:
'2127
remove the green ground screw.
D.
Lift up on the top hinge until the hinge
SLQLVUHPRYHGIURPWKHIUHH]HUGRRUDQG
then gently pull the wires and wire harness
connector through the hinge pin.
NOTE:
'R
not tug on the wires or connector(s) as you
pull them through the hinge pin.
E.
3DUWLDOO\RSHQWKHIUHH]HUGRRUDQGOLIWWKH
door off of the center hinge pin. Place the
door on a soft, covered surface to avoid
damage to the finish.
F.
Tape the hinge to the top of the refrigerator
cabinet to avoid possible damage to the
cabinet finish, the hinge itself or the ground
wire which is still attached.
G.
)ROORZWKHSUHFHGLQJVWHSVWRUHPRYHWKH
right-hand
IUHH]HUGRRU
INSTALLING THE REFRIGERATOR
Hinge
Cover
Screw
Green Ground
Screw
Release
Catch
Top Hinge
Screws
Ground
Wire
INST
ALLA
TION INSTRUCTIONS
