14
49-60765
Care and Cleaning
CARE AND
CLEANING
Preparing to Move
Secure all loose items such as shelves and drawers by
taping them securely in place to prevent damage.
When using a hand truck to move the refrigerator, do not
rest the front or back of the refrigerator against the hand
truck. This could damage the refrigerator.
Handle only from the sides of the refrigerator.
Be sure the refrigerator stays in an upright position
during moving.
CAUTION
LIFTING HAZARD
8VHWZRRUPRUHSHRSOHWRPRYHDQGLQVWDOO
UHIULJHUDWRU)DLOXUHWRGRVRFDQUHVXOWLQEDFNRU
other injury.
Cleaning the Condenser
WARNING
To reduce the risk of death or
electric shock, you must follow these
instructions:
Ŷ
Unplug the refrigerator before removing any
panels.
Ŷ
Do not contact or damage any wiring while the
panel is removed.
Ŷ
Replace all parts and panels before plugging
the refrigerator back in.
Periodically, the condenser of the refrigerator will
become covered with dust and dirt. This can make your
refrigerator cool less effectively and use more energy.
You can improve the refrigerators' performance by
FOHDQLQJWKHFRQGHQVHU,WLVORFDWHG
at the back of your refrigerator, at the
bottom, behind the access cover.
Cleaning the condenser requires a
philliips screwdriver, vacuum cleaner
and soft brush with a long handle.
To clean the condenser:
1. Turn off the refrigerator.
2. Turn the leveling legs at each
front corner of the refrigerator
counterclockwise until the rollers
support the refrigerator.
3. Roll the refrigerator out far
enough so you can get behind it
at the bottom. Be sure not to pull
out any water lines connected to
your refrigerator.
4.
Unplug the refrigerator.
8VHWKH3KLOOLSVKHDGVFUHZGULYHU
to remove the screws securing
the cover to the refrigerator.
/RFDWHWKHFRQGHQVHU,WLVEHWZHHQWKHFRPSUHVVRU
DQGWKHIDQ,WLVDEODFNVTXDUHVKDSHPDGHRI
tubes with fins.
9DFXXPWKHFRQGHQVHU8VHWKHEUXVKWRJHQWO\
loosen dust and dirt from the gaps and fins of the
condenser.
2QFHWKHFRQGHQVHULVFOHDQUHLQVWDOOWKHDFFHVV
cover, replacing all screws.
9. Plug in the refrigerator.
10. Return it to its normal position. Turn the legs
clockwise until the legs again bear the weight of the
refrigerator. Also level the refrigerator as required
11. Turn the refrigerator back on. Check to see if the
refrigerator begins operating.
Compressor
Access Cover
)DQ
Condenser - clean with a soft,
long handled brush and a
vacuum cleaner