GE DSR-2000e, User Manual

Page: 18 / 70

Pause
PAUSE
During playback, press the Pause button to pause playback, and display a single
frame on-screen.
Pause is indicated:
•
As
PAUSE
near the upper left hand corner of the primary monitor, for
three seconds.
•
As PAUSE on the LCD.
Pause button
Single Frame Advance & Single Frame Rewind
REW FF
During Pause mode, rotate the Jog dial to view the frame directly before or after
the frame displayed on-screen.
Jog / Shuttle
AutoPause
During playback, moving the Jog (the inner dial) in any direction will freeze
playback. Depress the Freeze or any Play button to continue playback.
Start of Data & End of Data
If the start or end of data is reached during playback,
START OF DATA
or
END OF DATA
is indicated
near the upper left hand corner of the primary monitor.
2.3 The Search Interface
SEARCH
The Search Interface feature allows the user to search the hard disk for recorded
events, such as an alarm condition, or a previous recording session. For example,
each time Record mode is activated, it is considered a separate recording
session.
To enter the Search Filters menu, press the Search button. The Search Filters
menu is displayed on the primary monitor.
Search button
Search Filters
Start
DATE: 12/25/00 [ ]
(MM/DD/YY)
Stop
01/01/01 [ ]
(MM/DD/YY)
Start
TIME: 11:11:21 [ ]
Stop
12:34:34 [ ]
1 2 3 4 5 6 7 8
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ]
ALARM: [ ]
Use this to specify:
•
The Start and Stop date of
the search.
•
The Start and Stop time of
the search.
•
Which cameras to search
exclusively.
•
To search for recorded
alarms.
[CANCEL] [START SEARCH]