GE Druck UPS-III, User Manual

Page: 4 / 20

K0317 Issue No. 3 2
Physical
Dimensions......................... 77 x 129 x 24 mm(3” x 5” x 1”)
Weight .................................................. 275 grams (9.7 oz.)
Terminals ...................................4 mm sockets {gold plated}
Case ....................................................... High impact ABS
Relative Humidity.................................................... 0 to 90%
Safety
This symbol, on the loop calibrator, indicates that the
user should refer to the user guide or manual.
Batteries
• Remove batteries from the loop calibrator immediately
when discharged and before storage.
• Dispose of batteries in accordance with local regulations
and battery manufacturers' instructions.
• When storing and transporting batteries make sure they
cannot be short circuited.
Power Supply
The power supply for this loop calibrator can be the internal
non-rechargeable batteries or the external Universal power
supply unit (see accessories).
Battery life > 75 hours in measure mode
> 18 hours at 12 mA (source mode)
The display shows with low battery power.
Battery Replacement
• Unscrew and remove the securing screw from the battery
panel.
• Replace the batteries, check the polarity of the batteries.
• Refit and secure the battery panel.
Accessories
Assy 305 Test lead set
191-129 Power supply, Universal, 100-240 V a.c. 47-63Hz
38016 Carrying case
38023 Protective rubber boot