background image

4

   Safety 

K0454 Issue 1 - [EN]  English

3

Safety

Before you use the instrument, make sure that you read and 
understand all the related data. This includes: the applicable 
local safety procedures, the user manual (K0449), and the 
instructions for the accessories/options/equipment you are 
using it with.

General 
warnings

WARNING

It is dangerous to ignore the specified limits for the 
instrument or to use the instrument when it is not in its 
normal condition. Use the applicable protection and 
obey all safety precautions.

Do not use the instrument in locations with explosive 
gas, vapour or dust. There is a risk of an explosion.

Electrical 
warnings

To prevent electrical shocks or damage to the 
instrument, do not connect more than 30V between the 
terminals, or between the terminals and the ground 
(earth).

To prevent electrical shocks, use only the GE specified 
AC probe (Part: IO620-AC) to measure AC voltages 
(maximum: 300 Vac). 

This instrument uses a Lithium-Polymer (Li-Polymer) 
battery pack. To prevent an explosion or fire, do not 
short circuit, do not disassemble, keep it safe from 
damage. For operating conditions, see Table 1.

To prevent an explosion or fire, use only the GE 
specified battery, power supply and battery charger. 

To prevent battery leakage or heat generation, only use 
the battery charger and power supply in the 
temperature range 0 to 40°C (32 to 104°F). For 
operating conditions, see Table 1.

Pressure 
warnings

Some liquid and gas mixtures are dangerous. This 
includes mixtures that occur because of 
contamination. Make sure that the equipment is safe to 
use with the necessary media.

To prevent a dangerous release of pressure, isolate and 
bleed the system before you disconnect a pressure 
connection.

Continued

Summary of Contents for Druck DPI 620












Reviews: