manualshive.com logo in svg

GE D30 series, Instruction Manual

Share
Download
GE D30 series Instruction Manual Download Page 179

CHAPTER 4: INTERFACES

FRONT PANEL INTERFACE

D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL

4-55

4

Figure 4-58: Product Setup menu

Use the Up or Down pushbutton to select 

DISPLAY PROPERTIES

, then press the Right or 

ENTER

 pushbutton.

Figure 4-59: Display Properties menu

Use the Up or Down pushbutton to select 

FLASH MESSAGE TIME

, then press the Right or 

ENTER

 pushbutton. If the relay is 

configured to require login to edit settings, and the user is not already logged in, the login page displays. When the user 
has successfully logged in, the setting is opened for edit. As the 

FLASH MESSAGE TIME

 setting accepts a numerical value, a 

keypad displays. The time is to be changed to 4.0 seconds.
The current setting displays. A flashing cursor line marks the insertion point, initially positioned after the last character of 
the setting. The setting range displays under the text.
Press the 

<--  Move Cursor

 and 

Move Cursor  -->

 Tab pushbuttons to move the insertion point. Place it after the 2.

Press the 

Backspace

 Tab pushbutton to remove the character to the left of the cursor, in this case the 2.

Using the arrow keys, enter another time, for example 4 for four seconds. These Up, Down, Left, and Right pushbuttons 
move the keypad key selector. Pressing the 

ENTER

 pushbutton with the 

-

  key selected inverts the sign. Pressing the 

ENTER

 

pushbutton with the decimal point selected enters that character at the insertion point. Push 

ENTER

 now to accept the 4.

Summary of Contents for D30 series















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands