GE Concord express Installation Instructions Manual Download Page 50

Page: 50 / 76

Programming the Panel

Options Menu

The

OPTIONS

menu lets you set up the system for downloading and silent arming, and lets you

adjust alphanumeric touchpad display brightness.

System Master Code (110)

User Codes (Default=1234)

The System Master Code performs
all system operations and user pro-
gramming.

To change the System Master Code:

1. With the display showing

USER CODES

, press

then

. The display shows

SYSTEM MAS-

TER CODE

2. Press

and

the display shows

SYSTEM MASTER nnnn

(current code)

3. Enter a new 4-digit code. The display flashes the entered code. Press

and the display

shows the new code.

Downloading (20)

Options (Default=on)

This setting determines whether or not the
panel can communicate with ToolBox software
for programming the system from off-site.

Note

The panel must have a Downloader phone num-
ber and Downloader code programmed and be
connected to a phone line for this feature to work.

To turn Downloading off or on:

1. Enter user programming with the system master code. The display shows

TIME AND DATE

2. Press

until the display shows

OPTIONS

3. Press

and the display shows

DOWNLOADING OFF/ON

(current setting)

4. Press

(off) or

(on). The display flashes the entered selection. Press

and the display shows the new setting.

Silent Arming (21)

Options (Default=off)

This setting determines whether the partition
arms the system with (off) or without (on)
sounding status beeps from sirens and the
touchpad.

Note

Turning this feature on will double the exit time.
This option is not available when SIA False Alarm
Reduction (0003) is on.

To turn Silent Arming off or on:

1. Enter user programming mode with the system master code. The display

shows

TIME AND DATE

2. Press

until the display shows

OPTIONS

3. Press

, then

and the display shows

SILENT ARMING OFF/ON

(current set-

ting)

4. Press

(off) or

(on). The display flashes the entered selection. Press

and the display shows the new setting.

Touchpad Brightness (22)

Options (Default=2)

This setting lightens or darkens the background
on touchpad displays. Each touchpad display
can be set independently to compensate for
lighting conditions in the touchpad location.

To adjust Touchpad Brightness:

1. Enter user programming mode with the system master code. The display

shows

TIME AND DATE

2. Press

until the display shows

OPTIONS

3. Press

, then

twice and the display shows

TOUCHPAD BRIGHTNESS n

(cur-

rent setting)

4. Enter a setting from 0 (darkest background) to 3 (brightest background). The

display flashes the entered selection. Press

and the display shows the new

setting.

Summary of Contents for Concord express













































































Search results

Summary of Contents for Concord express

Reviews:

Related manuals for Concord express

Brands by name

Popular brands

GE Concord express, Installation Instructions Manual

Search results

Summary of Contents for Concord express

Reviews:

Related manuals for Concord express

Brands by name

Popular brands