manualshive.com logo in svg

GE Calibur DVMR Triplex eZ, User Manual

Share
Download
GE Calibur DVMR Triplex eZ User Manual Download Page 44

0150-0198B 

44 

Calibur DVMR

e

 

Triplex eZ 

Luminance Histogram 

Black

0

%L

White

Luminance

 

3.14 Archive Setup 

Data recorded by the unit can be archive to an external  
archive device. 

Use this menu to: 

• 

Turn Background Archiving mode 

Off

 and 

On

. 

• 

Erase the recorded data on a compatible archive device. 

 

q 

Main Menu 

→

 Archive Setup 

→

 Background Archive 

Background Archive:

  Commands the unit to record data to both the  

hard disk and the archive device simultaneously. 

Select from the following items. 

OFF:

  Turns background archiving Off. 

ON:

 Turns background archiving On. 

 

q 

Main Menu 

→

 Archive Setup 

→

 Erase Archive Medium 

Use this feature to erase all of the recorded data on an  
archive device.   

With 

Erase Archive Medium

 highlighted, press the 

Enter

  

button.  If a compatible archive device is connected, a  
confirmation box will appear, otherwise no action will occur. 

 

 

3.15 Communications 

Use this menu to: 

• 

Configure the baud rates and settings for the RS232 ports. 

• 

Configure the network address for the RS485 network. 

• 

Configure the Ethernet address and networks settings. 

Erase Archive Medium

Background Archive

ON

OFF

Message

Erase all Records. Are you sure?

YES

RS485

Ethernet

RS232

Summary of Contents for Calibur DVMR Triplex eZ


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands