GE Calibur DSR-1000eZ User Manual Download

Page: 17 / 64

0150-0238A

2-1

Calibur DSR-1000eZ

2 U

SER

PERATIONS

2.1 Recording

RECORD

To begin recording, press the

Record

button.

RECORD

will be indicated for

three seconds, near the upper left hand corner of the primary monitor. The
unit always starts recording at the end of the previously recorded data.

Recording will continue until:

•

Another mode is selected (Play mode, Reverse Play,or Stop
mode).

•

The disk is full (In No Overwrite and Overwrite Once modes).
See section

5.1 Advanced Menu

→

Disk Overwrite Mode

page 5-1, for details regarding Disk Overwrite modes.

Record button

Normal Recording

SPEED

REC/PLAY

The unit records at the normal record speed until an alarm condition is detected.
The normal record speed is indicated on the monitor if the display option is enabled,
and can be altered using the

Up/Down Record Speed

buttons, or in the menu

system.

For information about altering the normal record speed from the menu system, see

Main Menu

→

Record Settings

→

Normal Record Speed

, on page 4-5 of the

Operator Programming section of this manual.

The normal record speed can be altered while the unit is recording. The unit will
continue recording while the menu system is active.

Record Speed

buttons

Alarm Recording

ALARM

When an alarm condition is detected, the unit automatically switches to the
alarm record speed. The alarm condition is indicated in several ways:

•

With the word

ALARM

, displayed on the primary monitor, near the

upper left hand corner of the screen.

•

With the internal buzzer (if activated in the menu system). For
information about activating the internal buzzer during alarms, see

Main Menu

→

Alarms

on page 4-2 of the Operator programming

section of this manual.

•

By an external device, connected to the alarm output of the unit (if
the unit is installed that way).

Alarm Indicator

The alarm record speed cannot be changed using the

Up/Down Record Speed

buttons on the front

panel. The alarm record speed must be changed in the menu system. For information about altering
the alarm record speed, see

Main Menu

→

Record Settings

→

Alarm Record Speed

, on page 4-5

of the Operator Programming section of this manual.

The unit returns to the normal record speed when the alarm condition ends.

Summary of Contents for Calibur DSR-1000eZ

































































Search results

Summary of Contents for Calibur DSR-1000eZ

Reviews:

Related manuals for Calibur DSR-1000eZ

Brands by name

Popular brands

GE Calibur DSR-1000eZ, User Manual

Search results

Summary of Contents for Calibur DSR-1000eZ

Reviews:

Related manuals for Calibur DSR-1000eZ

Brands by name

Popular brands